No products in the cart.
| Item Code | Volts | Hz |
| ||
|---|---|---|---|---|---|
| DAN.NACOM.04 | 220–240V AC | 50/60 |
| Capacity | 6 / 8 tubes |
| Compatible Tube Sizes | 42 mm OD, 300 mL Kjeldahl tubes |
| Temperature Range | Ambient to 450 °C |
| Temperature Accuracy | ±1 °C |
| Heating Module Material | Aluminium alloy high-temperature block |
| Temperature Control | PID-based point and curve control |
| Construction | High-temperature digestion block with resistant chemical-pathways |
| Auto Scrubber | Automatic drain and refill after each digestion cycle |
| Power Supply | 220–240 V AC, 50/60 Hz |
| Power Consumption | 1.8–3 kW |
Related products
- Kjeldahl Instruments
Automatic Solvent Extraction System
Safety Features
- Standalone housing for Temperature controller to protect electronics from solvent area & heat zone.
- PC chart software performs Live graphical representation of time/temperature gradient on PC Connectivity
- Auto Alarm for recovery phase
- Auto power off mode on completion of extraction.
- Independent loading of sample with individual mechanical controls.
- Inbuilt safety features like auto error indication, auto over temperature protection and auto sensor break protection.
- Cold water line for condensation of solvent with silicon hose interconnection for condensor
SKU: DAN-6T-02 - Kjeldahl Instruments
ALL GLASS WATER DISTILLATION (AUTOMATIC)
This has been designed for better and accurate control of the distillation unit. It has been incorporated with advanced microcontroller based electronic circuitry, which gives and easy user machine interaction.
The alpha numeric LCD which has been used shows all messages that correspond to the running of the machine.- Environment friendly & suitability
- One Touch Use, Fully Automatic ,
- Intelligent, dual stage all glass type
- Fully automatic control save energy & money– By setting the required output volume in litters. Aer completion of the process heater is turned off and the cooling water inlet is closed automatically.
- Boiler empty detection intelligence built in– when the water level inside the boiler drops below the heater, boiler empty condition is detected.
- Gate Valve to one side – Conserves cooling water wastage in case of power failure
- Flow switch – In built safety feature for the equipment unit shut off in case of cooling water failure. When the inlet water flow to the unit is low, this error is displayed with buzzer indication. The process in paused until the inlet flow is resumed.
- Easy to read Alpha numeric LCD and keypad for all settings and messages that correspond to the running of the machine.
- Auto cleaning detection
- Probe error detection
- So Calibration of output volume to compensate seasonal temperature and flow rate changes
- Manual overriding flow sensor and Gate (solenoid) valve
- Serviceability Replaceable Silica sheathed (Quartz) Heater
- Safety of user & instrument against wattage/power variation
SKU: DN.WD.01/DN.WD.02 - Kjeldahl Instruments
Smart Fibre Determination System
- Independent Sample Loading with individual mechanical controls for flexible and efficient operation.
- 7-Inch Capacitive Full-HD Touch Display featuring an advanced GUI for seamless control, parameter settings, and real-time process monitoring.
- Multiple Programs can be created for customized fibre extraction methods and repeatable workflows.
- Inbuilt Scrubber removes fumes and vapors generated during fibre extraction, ensuring safe and clean operation.
- Inbuilt Safety System with auto-error indication, over-temperature protection, and auto sensor-break protection.
- Cold Water Condensation Line equipped with high-quality silicon hose interconnections for efficient and stable condensation.
- Chemical-Resistant Tubing & Components engineered for long service life even in harsh laboratory environments.
- Low-Maintenance Design with easy-access service areas and tool-less removal for cleaning and tubing replacement.
- Smart Error Detection including alarms for low water flow, low reagent levels, temperature deviations, and system abnormalities.
- Comprehensive Protection System featuring over-voltage, over-temperature, and dry-run protection for enhanced operational safety.
- Energy-Optimized System reducing power consumption without compromising fibre extraction performance.
- Heavy-Duty Laboratory Construction suitable for routine daily fibre extraction and demanding laboratory workloads.
- Compact & Modular Architecture for easy integration into modern laboratory setups and simplified servicing or upgrades.
- Role-Based Login supporting Admin and User accounts with separate permission levels.
- Secure Authentication with password-protected login for controlled access.
- Multiple Program Storage allowing users to save multiple programs internally.
- USB Backup & Restore – export (download) all programs to a USB drive and import (load) programs for quick setup, sharing, or recovery.
- Remote Monitoring & Control – optional Labs Connect module enables secure internet-based access to start/stop operations, view live status, check errors, and monitor progress remotely.
SKU: DAN.CFES.01
