No products in the cart.
Kjeldahl Instruments
Automatic Fibre Estimation System – (6 Place) Auto-Sequencing
Available in store
- Designed to protect electronics from acid / alkali wet area & heat zone
- Independent loading of sample with individual mechanical controls
- Auto acoustic alarm on completion of process
- Auto power off mode on completion of process
- Inbuilt safety features like auto error indication, auto over temperature protection and auto sensor break protection
- PC chart Software Performs Live Graphical Representation of Time/ Temperature Gradient on PC Connectivity
|
|---|
Technical Specification:
| Description | Automatic Six Place PC Compatible Autosequencing Regular Version Fibre Estimation System |
| Display | Bright Digital two line Alphanumeric LCD Digital Display of time and temp. |
| No. of Positions | Six Samples |
| Sample Size | 0.1 to 4 gms (depending on the type of sample) |
| Temperature Control Range | RT- 500º C (Continuously variable) |
| Digital Timer | 0-99.59 hrs (Settable in hrs, min and seconds), Digital display of set time and actual time (1-5999 minutes) , Modes of operation: heater cut off mode & alarm mode |
| Temperature Accuracy / Precision | ± 0.5° C |
| Ramp & Hold | Integrated Auto Sequencing programs with 12 desirable sequence ramp / steps of time and temp. domain for each programme |
| Presets | Selectable Programs(Customizable): Integrated Auto Sequencing Features with 30 intelligent memory programs |
| Heater Source | Ceramic Infrared Heater |
| PID Control | Fuzzy logic Microprocessor based PID Controller with Auto tuning facility |
| Temperature Setting | Feather touch membrane keys |
| Crucibles | Sintered Silica glass Crucible with P1 Porosity disc (6 Nos.) |
| Extractor | Marked borosilicate extraction vessel |
| Preheating Hotplate | Fibra Flow System with self priming pump connected to water suction filter pump. |
| Power Consumption | 2500 Watts. |
| PC & Printer Connectivity | Direct USB port for PC/Laptop connectivity Intelligent Soware for PC compatibility for 2 way Bidirectional communication |
Related products
- Kjeldahl Instruments
ALL GLASS WATER DISTILLATION (AUTOMATIC)
This has been designed for better and accurate control of the distillation unit. It has been incorporated with advanced microcontroller based electronic circuitry, which gives and easy user machine interaction.
The alpha numeric LCD which has been used shows all messages that correspond to the running of the machine.- Environment friendly & suitability
- One Touch Use, Fully Automatic ,
- Intelligent, dual stage all glass type
- Fully automatic control save energy & money– By setting the required output volume in litters. Aer completion of the process heater is turned off and the cooling water inlet is closed automatically.
- Boiler empty detection intelligence built in– when the water level inside the boiler drops below the heater, boiler empty condition is detected.
- Gate Valve to one side – Conserves cooling water wastage in case of power failure
- Flow switch – In built safety feature for the equipment unit shut off in case of cooling water failure. When the inlet water flow to the unit is low, this error is displayed with buzzer indication. The process in paused until the inlet flow is resumed.
- Easy to read Alpha numeric LCD and keypad for all settings and messages that correspond to the running of the machine.
- Auto cleaning detection
- Probe error detection
- So Calibration of output volume to compensate seasonal temperature and flow rate changes
- Manual overriding flow sensor and Gate (solenoid) valve
- Serviceability Replaceable Silica sheathed (Quartz) Heater
- Safety of user & instrument against wattage/power variation
SKU: DN.WD.01/DN.WD.02 - Kjeldahl Instruments
Three in One Nitrogen Analyser – Kjeldahl
Three in One Combo Automatic 6 Place Digestion With Distillation & Scrubber With Common Touch Screen Control & Display
- The control panel unit along with inbuilt temperature controller, timer, mother board and SMPS is be isolated in separate control tower and housing to protect electronics from wet chemistry & acid/ alkali process area for longevity and safety of all electronic components.
- Water in the scrubber tank is drained and filled automatically every time at the end of digestion thereby draining the water for every consecutive cycle.
- Manual drain of water from the scrubber tank is also provided.
- A separate distilled water line to the steam generator.
- Auto refilling of distilled water to the steam generator is provided by using a proximity sensor.
- Monitoring of boiler water level from outside.
- Users choice to choose independent or combined operation of digestion and distillation.
- Inbuilt safety from Over voltage
SKU: DN.NA.01 - Kjeldahl Instruments
Automatic Solvent Extraction System
Safety Features
- Standalone housing for Temperature controller to protect electronics from solvent area & heat zone.
- PC chart software performs Live graphical representation of time/temperature gradient on PC Connectivity
- Auto Alarm for recovery phase
- Auto power off mode on completion of extraction.
- Independent loading of sample with individual mechanical controls.
- Inbuilt safety features like auto error indication, auto over temperature protection and auto sensor break protection.
- Cold water line for condensation of solvent with silicon hose interconnection for condensor
SKU: DAN-6T-02
